How to input unlock code on phones?

How to enter my Unlock Code on Alcatel ?

NCK:       Network Lock
NSCK:       Network Subset Lock
SPCK:       Service Provider Lock
CPCK:       Corporate Lock
SIMCK:       Sim Lock

=================================

Please put new SIM and when prompted enter Network Key/NCK code only.

=================================

 

Model : Method Generic

1 – Switch ON your phone without SIM Card,

2 – Then compose : *#0000*CODE#,

3 – To finish compose : *#0001*CODE#.

 

Alternative method for Alcatel models where phone NOT giving prompt to enter code:

Type *#*#3646633#*#* and from engeneering menu select SIMMELOCK

 

Model : 531 & 535

1 – Switch ON your phone without SIM Card,

2 – Press * and without release compose 787292,

3 – A new menu “Unlock Network” will appear, then select “YES”,

4 – Enter the Code we send to you.

 

Model : All other Alcatel

1 – Switch on your phone with a not allowed SIM Card,

2 – When the message “Enter Network Key” appear enter the Code we send to you

 

How to enter my Unlock Code on Apple iPhone ?

Actually there is no need to Enter an “Unlock Code” on Apple iPhone, all the process is done via iTunes once you receive from us the confirmation of Unlock. The most important part is in case you “Jailbreak” your iPhone in past to unlock it, that you remove all application related to that. Once your iPhone is clean from any Jailbreak Application please follow these steps :

1 – Install the last version of iTunes

2 – Make sure your iPhone is updated with the latest version of Firmware (Currently iOS8/9)

3 – Switch on your iPhone with an Not Accepted SIM Card

4 – Connect your iPhone to your computer using the Original USB Cable

5 – Launch iTunes & wait until iTunes detect your iPhone

6 – Now disconnect your iPhone and reconnect it after 10 seconds.

7 – Your iPhone is now Unlocked.

PS: in Case your iPhone is not unlocked, just do “Restore” ! You should know iCloud details if asked as we cannot help you with iClound activation issues.

 

How to enter my Unlock Code on AT-T Quickfire?

– Device must be in Portrait mode.

– Type: *#865625#

– SIM Unlock Process Menu will appear.

– Press OK to continue.

– Enter Unlock Code will appear.

– Enter the 16 digit subsidy unlock code

– Press Done.

– Your device is unlocked.

 

How to enter my Unlock Code on BENQ ?

Model : All Benq

 

1 – Switch ON your phone with a not allowed SIM Card,

2 – Enter the Unlock Code we send to you.

 

How to enter my Unlock Code on BlackBerry ?

How to enter SPC/MSL Code?

 

Once you receive your 8 MSL or SPC code for your blackberry, you will have to unlock it.   You can do this by:

From the mainscreen of the BlackBerry, press the green call button to enter the phone

Type in ##MSLCODE then the green talk button (ie: ##123456 Green talk button)

In the CDMA service edit screen, delete the number in the first row (000000xxxx) and replace it with your current phone number

Press the menu key and choose save

The device will re-boot

When the device re-boots, Activation Required will be gone and the active carrier name will now appear

 

Model : All BlackBerry

1 – Using the menu go to Settings Menu -> SIM card pressselect.

2 – While holding the SHIFT key, type mepd

3 – You should now see the five locking categories listed.

4 – While holding the SHIFT KEY, type mep2.

5 – Release the shift key.

6 – You are now prompted to enter the Network MEP code (it will also state how many attempts left)

7 – Enter the code

8 – Enter Return/Enter

9 – The device should then be unlocked

=================================

MEP stands for Mobile Equipment Personalisation

=================================

Blackberry phones actually have 5 different possible locks, each requiring a unique code, that can prevent you from using your phone with another network.

These are called;

SIM: known as MEP1

NETWORK: known as MEP2 Network unlock code

NETWORK SUBSET: known as MEP3

SERVICE PROVIDER: known as MEP4 Service Provider code

CORPORATE: known as MEP5

99% of the time it €™s the NETWORK (MEP2) that needs to be unlocked, but some phones, particularly in the USA and Canada also require SERVICE PROVIDER (MEP4) to be unlocked.

=================================

 

Model : Blackberry 9530 Storm

1. Insert any SIM card and turn ON your Blackberry.

2. Turn OFF all the wireless connections.

3. Go Back One Step by Pressing the Back Key.

4. Go to Options

5. Select SIM card.

6. Press the Menu Key and select “Show Keyboard”.

7. Tilt the phone in Horizontal Position so that the Keyboard is displayed in the Landscape Mode.

8. Type MEPD [you will not be able to see the typed info].

9. Then enter MEP2

10. Now your Blackberry will ask you to enter network MEP code

11. Enter the Unlock Code provided by us to you and Press the Enter Key on the Screen.

12. It will now say “Code Accepted’

13. Congratulations! Your phone is now unlocked. Now your phone can be used with any GSM Network with SIM Card.

14. Go back to the Home Screen. Press the Menu Button and click on Manage Connections.

15. Turn all the Connections ON.The phone will now reboot and ”Activation Required” will no longer be displayed.

 

Model : BlackBerry Bold 9000 & Torch

 

1) Make sure your SIM card is NOT inserted into the device.

2) Turn on the phone and click the �Manage Connections� icon. Choose the option �Turn off all connections.� The cellular radio will be turned off.

3) Go back to the Home screen and click the �Options� icon and select �Advanced Options.�

4) Scroll down and select �SIM Card� from the list.

5) Press the following keys in order: (M) (E) (P) (E)

6) A prompt will appear asking for the unlock code. Input the 16-digit code exactly.

9) Reboot your device.

10) Re-enable the cellular radio

 

Model : Curve, 8300, 8310, 8320, 8800, 8820

 

Must be done without a sim card inserted & wireless radios must be turned off.

 

1. Go to settings,

2. Go to options.

3. Go to advanced options.

4. Go to sim card.

4. Hold the ALT Key while typing in MEPE or MEPD or MEPPE or MEPPD ( not case sensitive ) ( you will not see text appear on screen while typing ).

5. It will say “Enter Network MEP Code, then you type in the unlock code, press in the trackball to confirm.

6. Your phone is now unlocked.

 

Model : BlackBery Storm (9500)

 

1. Insert any sim card

2. Turn off all of the wireless connections

3. Go to Options

4. Select Advanced Options

5. Select SIM Card

6. Hit menu select show keybord

7. Enter mepd (you will not be able to see the typed info)

8. Enter mep2

9. Now it will say enter network mep code

 

Model : BlackBerry 8700

 

Go to the Menu -> Options -> Advanced Options -> Sim card press select, while holding the Shift key (bottom right corner CAPS), type mepd. You should now see the five locking categories listed, while holding the alt key, type mep2. Release the alt key. You are now prompted to enter the Network MEP code. Enter the code, enter Return/Enter, the device should then be unlocked.

 

Model : BlackBerry 8800

 

***** You must have a SIM card in your phone to complete these steps ( Can be active or inactive ) *****

 

1 – Go to settings menu => and then Options

2 – Select Advanced options => and then Sim card

3 – Type MEPD using your Blackberry keyboard (NOTE: You will not see any text appear on the screen while typing MEPD)

4 – Hold the ALT Key while typing in MEPE on your Blackberry keyboard (NOTE: You will not see any text appear on the screen while typing MEPD)

5 – You should be presented with a prompt “Enter Network MEP Code”. Type in the 16 digit unlock code received from our website and press in the track wheel / jog dial to confirm

6 – Your phone is now unlocked

 

Model : BlackBerry 8100 Pearl

 

1 – Go to Options Menu => Advanced Options

2 – In the SIM Card menu, hold down the shift (right of the zero, cap) press meppd

3 – You’ll see the unlocking level screen there you hold the ALT key (left side below @) type mepp2

4 – Enter the unlock code.

 

Model : BlackBerry 8100 (Vodafone Australia)

PLEASE READ THE INSTRUCTIONS CAREFULLY BEFORE YOU ATTEMPT ANY UNLOCK PROCESS

This procedure unlocks the handset from being network restricted from only using SIM cards from Vodafone Australia. In case of difficulties, please refer to the FAQ listed below

 

1. Take note of the unlocking code shown above

2. Insert a Non-Vodafone Australia working SIM card.

3. Ensure the phone is charged and then switch the phone on.

4. Optional Step: If the SIM card has a PIN, enter your PIN number. (See FAQ below)

5. The phone will then display a message. The most common is �Invalid SIM card�. (Different message? See FAQ below)

6. Select Turn Wireless Offï

7. Select Settings Menu , then go to Advanced Options > SIM Card

8. Type alt-MEPT by holding the ALT-key and typing the letters MEPT with multitap i.e. type hold ALT, type

9. When prompted with �Enter Network MEP code (255 left)� on the screen, enter the 16-digit network unlock code provided for your phone, then press Enter. (Unlocking code is shown above)

10. Reset the phone by pulling the battery

11. Switch the phone on and the handset will be unlocked automatically. This will be confirmed if you can make and receive calls with the Non-Vodafone Australia SIM card. (You will need reception and phone credit with the different network provider)

Please Note:

If the unlocking code is entered incorrectly the next attempt to unlock the device will be delayed for 10 seconds increments. The number of unlocking attempts is limited to 255 tries only. When 255 attempts is reached the phone will be permanently blocked.

To unblock the phone, it must be taken to a RIM service centre. No outgoing calls including emergency call is possible when the phone is blocked.

 

FAQ:

Question: My phone asks to enter a PIN number

Answer: For SIM cards with PIN ENBLED you will be required to enter a PIN. This is not the unlocking code that has just been provided. For information concerning the PIN, PIN2, PUK and PUK2 codes for a SIM card please read the manual that came with your phone. This is not a handset unlocking difficulty.

Question: My handset displays a different message then what is shown in this procedure when I insert a Non Vodafone Australia SIM card

Answer: The most common message the phone will display is �Invalid SIM card�. Because each handset may have a different variation in software there is no common message. If your handset displays a different message it is recommended to move onto the next step. Note: Faulty SIM Cards – The handset may also display messages indicating the SIM you are using to unlock the handset is faulty, it could display �Insert SIM� �Bad Card�, �Card Error� or �Card Rejected�, confirm the SIM card is inserted correctly �� Gold area downwards and the cut of the corner matches correctly. You will need a working Non Vodafone SIM card to unlock the handset, Vodafone can not assists with other networks faulty SIMs.

Question: I am outside of Australia and experiencing difficulties unlocking the phone that I purchased from a Vodafone Australia outlet

Answer: Clearly note this in the difficulties description. Vodafone Australia can only send a reply to the difficulty by email.

 

How to enter my Unlock Code on Bosch ?

Model : All Bosch

 

Switch on your phone with a not allowed SIM Card

When the message “Enter Network Key” appear enter the Code we send to you.

How to enter my Unlock Code on Ericsson ?

Model : All Ericsson

 

1 – Switch ON your phone without SIM Card,

 

2 – Press 1 time the left arrow,

 

3 – Press 2 times the button * ,

 

4 – Press 1 time the left arrow,

 

5 – The message “Personalize with MNC2” will appear,

 

6 – You can now enter the Unlock Code we send to you.

How to enter my Unlock Code on HTC, SPV, MDA, XDA, iMATE and T-Mobile G1 ?

=================================

 

Please put non-accepted SIM and when prompted enter code

 

=================================

 

Model : HTC SNAP

 

– Go to “Setting”

 

– Go to “Security”

 

– Select “Unlocking SIM” (at the bottom option)

 

– Enter Code you receive !

 

 

 

Model : All (including G1)

 

 

 

1 – Switch ON mobile with a not Allowed SIM Card,

 

2 – If phone ask, enter the PIN code of your SIM Card

 

3 – Now phone will ask you to enter the unlocking code !

 

 

 

Model : SPV C500

 

 

 

1 – Switch ON mobile with a not Allowed SIM Card,

 

2 – The message “PUK2” appear,

 

3 – Enter the Unlock Code we send to you.

 

4 – Phone ASK for New Code PIN enter : 0000

 

5 – Confirm and compose : 0000**

 

6 – Click “Finish” and phone will show “Network is locked…”

 

7 – Enter the Unlock Code we send to you and click “Finish”

 

8 – Restart the Mobile who is Unlocked !

 

 

 

How To Unlock CDMA/GSM HTC Phones:

 

 

 

1. Insert not allowed SIM card.

 

2. Phone will tell you to insert an allowed SIM card and that the phone will switch back to CDMA mode.

 

3. Click OK.

 

4. Click green button to get to the main screen of the phone.

 

5. Click on settings.

 

6. Click on all settings.

 

7. In the personal tab click on security.

 

8. The phone will ask you to enter the unlock code. Enter it. Done.

 

 

 

HTC DROID Incredible 2 – ADR6350VW SIM Unlock Instructions

 

 

 

If customer has a Verizon Wireless SIM card in the Device:

 

Generate or buy SIM Unlock code

 

Go to: Settings -> Security -> Disable SIM card lock + Enter

 

Enter the SIM Unlock code when prompted.

 

 

 

If customer has non-Verizon Wireless SIM card in the Device:

 

 

 

– Generate or buy SIM Unlock code

 

– Have the customer power cycle the device

 

– Enter the SIM Unlock code when prompted (This will occur when device is powering up)

 

 

How to enter my Unlock Code on Huawei ?

=================================

 

Please put non-accepted sim in phone and enter code provided

 

=================================

 

If you have 4 x 16 digit code, please only enter first 16 digits

 

=================================

 

Please put new SIM and when prompted enter the first  16 digits only

 

=================================

 

In case first set of 16 digit code didnt work, please do a factory reset and after reboot enter the 3rd set of 16 digit code it should unlock

 

=================================

 

If 3rd set of 16 digit also didn’t help, please enter the 2nd code and if no luck enter 4th set of 16 digit code, but each after reboot, one of these should unlock your device

 

=================================

 

1st 16 digit code = Network Code (Network PIN)

 

2nd and 3rd set of 16 digit codes = SP Codes (Service Provider PIN)

4th set of 16 digit code = SimBlock/Reet Code (In case if your phone is Hard-locked)

Thus Unlock is 100% Guaranteed even if you have blocked the counter before

 

=================================

 

 

How to enter my Unlock Code on Kenwood ?

Model : All Kenwood

 

1 – Switch ON your phone with a not Accepted SIM Card,

 

2 – Enter the Unlock Code we send to you.

How to enter my Unlock Code on LG ?

 

SIM_UNLOCK=Network = NCK

 

SP_LOCK= SPCK = Service Provider

 

 

 

Standard Unlocking Method for ALL Models;

 

1. Power on your phone  without  any simcard inserted

 

2. Once it finishes booting up, go to your phone keypad and dial 2945#*XXX# – replace XXX with your phone model i.e. 769 so you should type 2945#*769#

 

3. Phone will display a list with Network lock , Service Provider Lock , Network Subset Lock, Corporate Lock , and SIM/USIM Lock . You must select Network Lock, unless you require other level of unlock

 

4. The phone may prompt you for the SIM network unlock pin  or” Service Provider Unlock”. Enter the unlock code and tap on the Unlock  button. If phone returns message  “the phone is not personalized” on NCK/SIM_Unlock please enter SP_LOCK (Service Provider Lock)

 

5. Device should say: Network unlock successful . Your phone is now permanently unlocked

 

OR

 

1. Insert SIM card – Other Network SIM

 

2. Power on the phone and wait for pop up to say phone is restricted

 

4. Input SIM unlock code/NCK/Network code which we have provided

 

5. All done

 

 

 

If you are not getting PROMPT to enter code, please follow the above ”standard method” BUT with Origional/Accepted/Current Network Locked SIM in phone. So you do the same process enter  2945#*XXX# when it prompts enter the NCK code.

 

 

 

For Nexus 5 and others where # code is not working;

 

 

 

Go to the dial screen and press *#865625# as if making a call, enter code when prompted

– or, go to the dial screen and press 2945#*71001# as if making a call, enter code when prompted

 

 

 

LG MS 500

 

1. Turn on phone with accepted /Current Locked Network SIM card.

 

2. Enter 2945#*500# or 2945#*505#

 

3. A menu will pop up, select “SIM Unlock Process”

 

4.After That Select “Network Lock & Service Provider Lock”

 

5. Enter your NCK and SPCK (If Prompt?) unlock code received and hit OK

 

6. Your LG phone may automatically reboot

 

LG P880

 

2945#*880#

 

 

LG G2 / D803 / D802 / D801

Turn on phone with Not Accepted SIM card

A menu will pop up to Insert the code

Insert the provided code and press OK

Device is now unlocked

 

Method 2

Turn on phone without any sim card and dial 2945#*803# or   2945#*802#   or   2945#*801#

A menu will pop up chose   option 1 ( Network unlock ).

Insert the provided code and press OK

Device is now unlocked.

 

 

 

Model : LG Optimus 3D P920

 

 

 

1. Power on your LG phone with the original SIM card in

 

2. Enter 2945#*920#

 

3. A menu will pop up, select SIM Unlock or network lock

 

4. Enter your NCK unlock code and hit OK

 

5. Your LG phone may automatically reboot

 

 

 

Model : LG Cookie Style T310

 

 

 

1 – Power ON the phone with a not accepted simcard,

 

2 – Type 2945#*310# to enter unlock menu,

 

3 – Enter unlock code.

 

 

 

Model: LG GT400 Viewty Smile

 

 

 

1. Switch ON the phone without SIM Card,

 

2. Press the “CellPhone” icon at the bottom of the screen to show the keypad,

 

3. Compose 2945#*400#

 

4. A new menu will appear, select “SIM Unlock”

 

5. Enter the Unlock Code and press OK

 

6. The phone will restart and is now unlocked !

 

 

 

Model: LG Optimus 2X

 

 

 

1. Insert the sim card which works out your phone

 

2. Enter 2945#*990#

 

3. window appears for the code

 

4. Enter the code nck received

 

5. the phone is unlocked

 

 

 

Model: LG Optimus 7 and LG-E900

 

 

 

1 – Insert SIM Card from a not accepted SIM Card

 

2 – Type the PIN Code of your SIM Card and submit it

 

3 – The message “… Please call your network provider to get the unlock code” will appear

 

 

 

But on the bottom of the screen, the keyboard is still here with “#” and “*” and invite you to “Type PIN”

 

Just submit the code you receive and that’s it !

 

 

 

Model: LG P500 Optimus

 

 

 

1. Power ON your phone with not allowed sim card (one that didn�t come with the phone)

 

2. Type 2945#*500#

 

3. the phone will ask you to input the unlock code twice, just input the unlock code

 

4. Device is now unlocked

 

 

 

Model : LG GW300 Viewty & Gossip

 

 

 

1. Power on your LG Viewty GW300 with the original SIM card in.

 

2. Enter 2945#*71001#

 

3. A menu will pop up, select SIM Unlock.

 

4. Enter your unlock code and hit OK.

 

5. Your LG Viewty GW300 may automatically reboot and should now be unlocked!

 

 

 

Model: LG GT350 Town

 

 

 

1. Power on the LG GT350 Town with the original SIM card in.

 

2. Enter 2945#*350#

 

3. A menu will pop up, select SIM Unlock, DO NOT select NETWORK unlock.

 

4. Enter your unlock code and hit OK.

 

5. The LG GT350 Town will restart..

 

6. Put in any sim card you want, you will need to make a call for the new sim card to initialise with the phone.

 

7. Thats it, mobile unlocked.

 

 

 

Model: LG GM360 Viewty Snap

 

 

 

1. Power on your LG Viewty GM360 with the original SIM card in.

 

2. Enter 2945#*360#

 

3. A menu will pop up, select SIM Unlock.

 

4. Enter your unlock code and hit OK.

 

 

 

Model: LG GS290 Cookie Fresh

 

 

 

1. Power phone ON with original SIM

 

2. Type 2945#*290# to enter unlock menu

 

3. Enter the unlocking code

 

 

 

Model: LG GT400

 

 

 

1. Turn phone on without simcard

 

2. Press telephone icon at bottom of screen to bring up the phone keypad

 

3. Enter 2945#*400#

 

4. A menu will pop up, select network unlock

 

5. Enter your unlock code and press ok

 

6. The phone will then reboot and the unlock is complete

 

 

 

Model: LG GW620

 

 

 

1. power phone ON with original SIM

 

2. type 2945#*620# to enter unlock menu

 

3. Enter the unlocking code

 

 

 

Model: LG GM205

 

 

 

1. switch on your phone with original working simcard

 

2. enter code 2495#71001# .. nothing will show in the screen.

 

3. now go to menu > setting > security > simlock > network lock > deactivate: enter your unlock code in it

 

 

 

Model: LG GW820 eXpo

 

 

 

1. Power on your LG GW820 eXpo with the original SIM card in.

 

2. Enter 2945#*700#

 

3. A menu will pop up, select SIM Unlock.

 

4. Enter your unlock code and hit OK.

 

5. Your LG GW820 eXpo may automatically reboot.

 

 

 

Model : LG GM205

 

 

 

1. Power phone ON with original SIM

 

2. Type 2945#*71001# to enter unlock menu

 

3. Enter the unlocking code

 

 

 

Model: LG GB250, GB220

 

 

 

1. Power on your phone without SIM card

 

2. Enter 2945#*71001#

 

3. From the menu that pops up select “SIM unlock”

 

4. Enter unlock code you received from our website and press OK

 

5. The phone will then reboot and the unlock is complete

 

 

 

Model : LG GW520

 

 

 

1. power phone ON with original SIM

 

2. type 2945#*71001# to enter unlock menu

 

3. Enter the unlocking code

 

 

 

Model : LG Viewty / GW300

 

 

 

1. Power on your LG Viewty GW300 with the original SIM card in.

 

2. Enter 2945#*700#

 

3. A menu will pop up, select SIM Unlock.

 

4. Enter your unlock code and hit OK. (Entering multiple incorrect unlock codes may permanently lock your phone!)

 

5. Your LG Viewty GW300 may automatically reboot and should now be unlocked!

 

 

 

Model: LG BL20

 

 

 

1. insert original sim card and turn phone on.

 

2. Enter 2945#*20#

 

3. A menu will pop up, select sim unlock

 

4. Enter your unlock code and press ok

 

 

 

Model: LG BL40

 

 

 

1. insert original sim card and turn phone on.

 

2. Enter 2945#*40#

 

3. A menu will pop up, select sim unlock

 

4. Enter your unlock code and press ok

 

 

 

Model : LG C1100

 

 

 

– First you must put in an allowed simcard, then :

 

– type 2945#*1201#.

 

– Goto Menu/Settings/Security Settings/Sim Locks

 

– Select ‘Locktype’/Deactivate and Enter the code.

 

 

 

Model : LG GT505

 

 

 

– power phone ON without SIM

 

– type 2945#*505# to enter unlock menu

 

– enter unlock code

 

 

 

Model : LG GB250

 

 

 

– power phone ON without SIM

 

– type 2945#*71001# to enter unlock menu

 

– enter unlock code

 

 

 

Model : LG GW520

 

 

 

– power phone ON without SIM

 

– type 2945#*71001# to enter unlock menu

 

– enter unlock code !

 

 

 

Model : LG KB770

 

 

 

1. Power on phone with original SIM card

 

2. Type 2945*#770#

 

3. In the menu that appears select Sim unlock

 

4. Enter supplied unlock code

 

5. Your phone is unlocked

 

 

 

Model : LG KP170

 

 

 

1 – Switch ON your phone with a T Mobile Sim inserted

 

2 – Press telephone icon at bottom of screen to bring up the phone keypad

 

3 – Then compose : 2945#*170#

 

4 – A menu will pop up, select Unlock Usim

 

5 – Then Select Network Lock

 

6 – Enter your unlock code and press ok (you only have 10 attempts)

 

7 – The phone will then reboot and the unlock is complete.

 

 

 

Model: LG CU-515

 

 

 

1.Put a SP-locked sim in the phone, phone say invalid smart chip

 

2.Now enter *#865625# then select option 1 and then again select 1 and enter your 16 digits code

 

Phone will be unlocked!

 

 

 

Model : LG TE365

 

 

 

1. Power on phone with original SIM card

 

2. Type *#0001#code#

 

3. Your phone is unlocked

 

 

 

Model : LG CT810 (Incite)

 

 

 

1. Power on phone with original SIM card

 

2. Type 2945#*810#

 

3. In the menu that appears select Sim unlock

 

4. Enter supplied unlock code

 

5. Your phone is unlocked

 

 

 

Model : LG CB630 (Invision)

 

 

 

1) Insert an AT&T or Cingular SIM in the phone; it does not have to be an active SIM

 

2) Dial this into the LG Incite’s phone menu

 

3) *#865625#

 

4) Press CALL

 

5) It should you ask you for the code

 

 

 

Model : LG U830

 

 

 

1. Have your unlock code handy.

 

2. InserI a 3 SIM card in the phone and switch power on.

 

3. Enter the following key sequence 94471877#*#

 

4. Select the option �unlock USIM�.

 

5. Select the option �network unlock�

 

6. Enter your unlock code.

 

7. Handset should now display �network unlock success�.

 

8. Handset will now restart.

 

 

 

Model : LG KF300

 

 

 

1. Put wrong simcard

 

2. Phone alert ‘insert correct card’

 

3. Right under in screen you see deblokkeren (dutch)

 

4. Click on it en click ‘Network lock off’

 

5. Insert code!

 

 

 

Model : LG KP100

 

 

 

1. Insert original sim card and turn phone on.

 

2. Enter 2945#*20001#

 

3. Sim unlock mode pop up .

 

4. Enter your unlock code and press ok

 

5. The phone will then reboot and the unlock is complete.

 

 

 

Model : LG KF755d

 

 

 

1. Insert original sim card and turn phone on

 

2. Press telephone icon at bottom of screen to bring up the phone keypad

 

3. Enter 2945#*755# (or 2945#*750# if 1st option doesn’t work)

 

4. A menu will pop up, select sim unlock

 

5. Enter your unlock code and press ok

 

6. The phone will then reboot and the unlock is complete

 

 

 

Model : LG Incite CT-810

 

 

 

– Insert a SIM from the original network

 

– 2945#*810# will show the unlock menu

 

– Enter unlock code

 

 

 

Model : LG KP265

 

 

 

1 – Use Original SIM to switch ON the Phone.

 

2 – Compose 2945#*265#

 

3 – Then go to MENU > SETTINGS > SECURITY

 

4 – Then go to SIM LOCKS > NETWORK > DESACTIVATE

 

5 – ENTER NCK (your Unlock Code)

 

 

 

Model : LG ME550

 

 

 

1 – Use Original SIM to switch ON the Phone.

 

2 – Compose 2945#*71101#

 

3 – Menu will appear, go to settings > security > sim lock

 

4 – Enter NCK ( Unlock Code ) and press OK.

 

 

 

Model : LG TU915

 

 

 

– Switch ON your phone with an allowed SIM Card

 

– Then compose: 2945#*9701#

 

– It should you ask you for the code

 

 

 

OR

 

 

 

Enter *#865625# then enter your 16 digits code

 

 

 

Model : LG KF390, KF390q and CF360

 

 

 

1) Insert a SIM Card from the network the mobile is locked to and turn it on

 

2) Insert the following sequence *#865625#;

 

3) Select ‘Unlock USIM’

 

4) Select ‘Network Lock’

 

5) Insert the unlock code

 

6) Select ok. Done!

 

 

 

Model : LG G910 :

 

 

 

1. Insert an invalid simcard and turn phone on.

 

2. Insert PIN

 

3. Phone says “Invalid sim card”

 

4. Select “Emergency calls”

 

5. Enter 2945#*71001#

 

6. Sim unlock mode pop up

 

7. Select netlock

 

8. Enter your 16-digit unlock code and press ok

 

9. The phone will then reboot and the unlock is complete.

 

 

 

Model : LG Prada, KE850 :

 

 

 

1. Switch the telephone on with Original SIM card inside.

 

2. Enter SIM pin if required.

 

3. Enter 2945#*8501# and press the call button (middle button bottom of the screen).

 

4. SIM unlock mode will appear on screen.

 

5. Enter unlock code

 

6. Select Reboot.

 

7. Switch phone off, and then turn back on again. Phone is now unlocked

 

 

 

Model : LG CT810

 

 

 

1. insert original sim card and turn phone on.

 

2. Enter 2945#*810#

 

3. A menu will pop up, select sim unlock

 

4. Enter your unlock code and press ok

 

5. The phone will then reboot and the unlock is complete.

 

 

 

Model : LG VU CU915 & CU920 (Vu)

 

 

 

1. Put a AT&T or Cingular SIM in the phone; it does not have to be an active SIM

 

2. Enter *#865625# then the 16 digit unlock code

 

3. Device should say: Network Lock Deactivated

 

4. Phone may automatically reboot and is now unlocked !

 

 

 

Model : LG U310

 

 

 

1. Turn ON the phone without SIM Card

 

2. Enter 815118#*#

 

3. Sim unlock mode pop up

 

4. Enter your unlock code and press ok

 

5. The phone will then reboot and the unlock is complete.

 

 

 

Model : LG iQ

 

 

 

1 – Switch ON mobile with a not Allowed SIM Card,

 

2 – If phone ask, enter the PIN code of your SIM Card

 

3 – Now phone will ask you to enter the unlocking code !

 

 

 

Model : LG KC550, KS360, KP230, KP500, KP501, KP270, KM900, KM500, GT810, GC900, GT360

 

 

 

1. Insert original sim card and turn phone on.

 

2. Enter 2945#*71001#

 

3. Sim unlock mode pop up .

 

4. Enter your unlock code and press ok

 

5. The phone will then reboot and the unlock is complete.

 

 

 

Model : LG KF700 (aka LG Virgo)

 

 

 

1. insert original sim card and turn phone on.

 

2. Enter 2945#*700#

 

3. A menu will pop up, select sim unlock

 

4. Enter your unlock code and press ok

 

5. The phone will then reboot and the unlock is complete.

 

 

 

Model : LG KC910, KF910 (aka LG Prada)

 

 

 

1. insert original sim card and turn phone on.

 

2. Enter 2945#*910#

 

3. A menu will pop up, select sim unlock

 

4. Enter your unlock code and press ok

 

5. The phone will then reboot and the unlock is complete.

 

 

 

Model : LG KF750

 

 

 

1. insert original sim card and turn phone on.

 

2. Enter 2945#*750#

 

3. A menu will pop up, select sim unlock

 

4. Enter your unlock code and press ok

 

5. The phone will then reboot and the unlock is complete.

 

 

 

Model : LG KF600

 

 

 

1. Insert original sim card and turn phone on.

 

2. Enter 2945#*71001#

 

3. Sim unlock mode pop up .

 

4. Enter your unlock code and press ok

 

5. The phone will then reboot and the unlock is complete.

 

 

 

Model : LG U970

 

 

 

1. Insert original sim card and turn phone on.

 

2. Enter 2945#*970#

 

3. A menu will pop up, select Unlock Usim.

 

4. Select Network Lock.

 

5. Enter the unlock code and ok.

 

 

 

Model : LG U300

 

 

 

1 – Switch ON the phone with Accepted SIM Card (from Original Network Provider)

 

2 – Enter Code : 815118#*#

 

3 – then phone will ask to enter NCK

 

 

 

Model : LG C2000

 

 

 

1) Insert non-Cingular SIM card

 

2) Power on the handset – phone will display “phone restricted”

 

3) Select “Cancel” – phone will display “phone restriction code”

 

4) Enter the SIM Unlock code

 

5) Select “OK” – the handset is now successfully unlocked

 

 

 

Model : LG KU990 Viewty & KE990

 

 

 

1. insert original sim card and turn phone on.

 

2. Press telephone icon at bottom of screen to bring up the phone keypad

 

3. Enter 2945#*990#

 

4. A menu will pop up, select sim unlock

 

5. Enter your unlock code and press ok

 

6. The phone will then reboot and the unlock is complete.

 

 

 

or

 

 

 

1. Without sim phone power “ON”

 

2. Hold “camera” + “lock” button

 

3. You will get key pad write 2945#*990#.

 

4. Press active code.

 

5. Your cellphone will be restart

 

6. Turn off cellphone and insert your sim (internation sim)

 

7. Enjoy your unlocked phone !

 

 

 

Model : LG TU720 – LG CU720 (Shine)

 

 

 

1) Power ON your phone with not allowed sim card (one that didn’t come with the phone)

 

2) Type *#865625#

 

3) the phone will ask you to input the unlock code twice, just input the unlock code

 

4) Device is now unlocked

 

 

 

Model : LG CE110

 

 

 

1) Put a non AT&T or Cingular SIM in the phone;

 

2) The phone display: Invalid Smart Chip

 

3) Power on handset

 

4) Select “Cancel” – phone displays “phone restriction code”

 

5) Enter the unlock code (8 digit code*)

 

6) Select “OK�” – the handset is successfully unlocked

 

 

 

Model : LG GR500 (Xenon)

 

 

 

1) Insert not-allowed SIM card

 

2) Power on the handset- phone will display “phone restricted”

 

3) Select “Cancel” – phone will display “phone restriction code”

 

4) Enter the SIM unlock code

 

5) Select “OK” – the handset is now successfully unlocked

 

 

 

or

 

 

 

1. insert original sim card and turn phone on.

 

2. Enter 2945#*9701#

 

3. A menu will pop up, select sim unlock

 

4. Enter your unlock code and press ok

 

5. The phone will then reboot and the unlock is complete.

 

 

 

or

 

 

 

After turning on your mobile phone, press: *#865625#

 

Press Yes to continue.

 

Enter the 16 digit Subsidy Unlock Code

 

Enter the 16 digit Subsidy Unlock Code, again.

 

Device should say: �Network Lock Deactivated�

 

Phone may automatically reboot

 

 

 

Model : LG CU320

 

 

 

1) Power on the handset

 

2) In Idle screen, input the special code “277634#*#”.

 

3) Enter the SIM Unlock code

 

4) Access the submenu “SIM Test” in Phone Test Mode.

 

5) Input the special code “2945#*#”.

 

6) Access the submenu “SIM Unlock” which is just activated after the special code.

 

7) Input the 8-digit Unlock code in the “Enter unlock code” input screen.

 

8) It will be unlocked.

 

 

 

Model : LG CU400 & CU405

 

 

 

1) Insert non-Cingular SIM card”

 

2) Power on the handset – Phone will display “Invalid SmartChip”.

 

3) Enter 159753#*#

 

4) Enter the 8 digit SIM Unlock code

 

5) Select “OK”.

 

6) The handset will be unlocked.

 

 

 

Model : LG CU500

 

 

 

1) Insert non-Cingular SIM card.

 

2) Power on the handset. Phone will display “Invalid SmartChip”

 

3) (IF THE PHONE DOES NOT DISPLAY INVALID SMARTCHIP, PLEASE POWER OFF AND ON AGAIN)

 

4) In Idle screen, enter 159753#*#. Phone will display “Enter NCK, Remaining 5

 

5) Enter the 8 digit SIM unlock code

 

6) Select “OK”

 

7) The handset is now successfully unlocked.

 

 

 

Model : LG CU515, CU575 (Trax)

 

 

 

1) Put a non-Cingular sim in the phone

 

2) Phone says invalid smart chip

 

3) Now enter *#865625# then select option 1 and then again select 1

 

4) Enter your 16 digits code

 

5) Device should say: Network Lock Deactivated

 

6) The handset is unlocked.

 

 

 

Model : LG U8150

 

 

 

1 – Switch ON your phone with a NOT Allowed SIM Card,

 

2 – Compose : 2, 7, 7, 6, 3, 4, #, *, #,

 

3 – Go to menu “SIM Lock”,

 

4 – Enter the Unlock Code we send to you.

 

 

 

Model : LG U400

 

 

 

1. Insert the network SIM in the handset which has given u the LG U400.

 

2. Enter 2945#*88110#.

 

3. The phone will then prompt ‘Unlock sim’. Press OK.

 

4. The phone will then prompt ‘Network Unlock’. Press OK.

 

5. The phone will then prompt- ‘Input Network Control Key’.

 

 

 

Enter the 8 digit unlocking code. Press OK. If the unlocking code comes with only 7 digits, add a 0 in front of the 7 digit code. If the unlocking code comes with only 6 digits, add 00 in front of the 6 digit code.

 

 

 

6. It should give you the message Success.

 

7. Come back to the main screen and Enter 2945#*88110#.

 

8. The phone will then prompt unlock sim. Press OK.

 

9. The phone will then prompt Network Unlock/ Lock but if you scroll down you will see a message Enter SP Lock. Enter SP Code.

 

10. Then press OK

 

 

 

Model : All other model

 

 

 

1 – Switch ON your phone with an Allowed SIM Card,

 

2 – Then compose :

 

 

 

2945#*5101# – (if you have a LG 510w)

 

1945#*5101# – (if you have a LG 1200 & B1200)

 

2945#*5221# – (if you have a LG 5200 & 52200)

 

2945#*5301# – (if you have a LG 5300)

 

2945#*5401# – (if you have a LG 5400)

 

2945#*70001# – (if you have a LG 7020)

 

2945#*7101# – (if you have a LG 7100)

 

2945#*1201# or 2945#*70001# – (if you have a LG 1100)

 

2945#*70001# – (if you have a LG7250T)

 

2945#*2201# – (if you have a LG C2200)

 

2945#*5301# – (if you have a LG T5100)

 

2945#*3311# – (if you have a LG C3310)

 

 

 

3 – Go to “Menu” and then to “Settings”,

 

4 – Then select “Security”,

 

5 – To finish select “Network Provider” and select “Desactivate”

 

6 – Enter the Unlock Code we send to you.

 

 

 

Model : To Classify

 

 

 

For the next models you must to insert the original SIM:

 

 

 

LG KF245c press 2945#*7101#

 

LG C3100 press 2945#*3101#

 

LG C3380 press 2945#*7101#

 

LG F2300 press 2945#*7101#

 

LG KE260 press 2945#*2601#

 

LG KE970 press 2945#*9701#

 

LG KG120 press 2945#*1201#

 

LG KG220 press 2945#*1201#

 

LG KG240 press 2945#*3311#

 

LG KG280 press 2945#*7101#

 

LG KG290 press 2945#*7101#

 

LG KG800 press 2945#*7101#

 

LG KU250 press 2945#*250#

 

LG KU380 press 2945#*380#

 

 

 

After that will appear an secret menu,go to settings-security- sim lock ,enter NCK and press OK.

 

 

 

For next models insert one SIM ,not the original SIM:

 

LG KU311 press 815118#*#

 

LG KU800 press 82652#*#

 

LG L600v press 815118#*#

 

LG U8150 press 277634#*#

 

LG U8210 press 277634#*#

 

LG U8500 press 277634#*#

 

LG U400 press 2945#*88110#

 

LG KC550 press 2945#*71001#

 

LG KU580 press 2945#*580#

 

LG KT520 press 2945#*520#

 

LG KF750 press 2945#*750#

 

LG KF600 press 2945#*71001#

 

LG KG275 press 2945#*20001#

 

LG KU380 press 2945#*380#

 

LG KU311 press 815118#*#

 

LG KU800 press 82652#*#

 

LG L600v press 815118#*#

 

LG U8150 press 277634#*#

 

LG U8210 press 277634#*#

 

LG U8500 press 277634#*#

 

LG C3100 press 2945#*3101#

 

LG C3380 press 2945#*7101#

 

LG F2300 press 2945#*7101#

 

LG KE260 press 2945#*2601#

 

LG KG120 press 2945#*1201#

 

LG KG220 press 2945#*1201#

 

LG KG240 press 2945#*3311#

 

LG KG280 press 2945#*7101#

 

LG KS500 press 2945#*500#

 

LG KP270 press 2945#*270#

 

LG KF240 press 2945#*240# or 2945#*2401#

 

LG KG290 press 2945#*7101#

 

LG KU250 press 2945#*250#

 

Enter NCK and press OK.

 

How to enter my Unlock Code on Mitsubishi ?

Model : Trium Mars

 

 

 

1 – Swith ON your phone without SIM Card,

 

2 – Press * and without release compose : 787090 or 787292,

 

3 – The menu “Unlock Network” will appear,

 

4 – Select “YES” and enter the Unlock we send to you.

 

 

 

Model : Mitsubishi M341i

 

 

 

1 – Swith ON your phone with an Accepted SIM Card,

 

2 – Press * and without release compose : 787292,

 

3 – The menu “Unlock Network” will appear,

 

4 – Select “YES” and enter the Unlock we send to you.

 

 

 

Model : Mitsubishi M342i

 

 

 

1 – Swith ON your phone with an Accepted SIM Card,

 

2 – Press * and without release compose : 787090,

 

3 – The menu “Unlock Network” will appear,

 

4 – Select “YES” and enter the Unlock we send to you.

 

 

 

Model : All Mitsubishi

 

 

 

1 – Switch ON your phone without SIM Card,

 

2 – Press * and without release compose : 787292 or 78729,

 

3 – The menu “Unlock Network” will appear,

 

4 – Select “YES” and enter the Unlock we send to you.

How to enter my Unlock Code on Motorola ?

Model : All Motorola

 

 

 

Insert NON-Accepted SIM card and when prompted enter GSM Primary Code, if you have received 2 x 8 digit codes then enter first 8 digits only.

 

 

 

or

 

 

 

1 – Switch ON your phone with a not allowed SIM Card,

 

2 – Phone show “Enter Special Code”,

 

3 – You can now enter the Unlock Code we send to you.

 

 

 

WARNING : If one of theses messages appear :

 

 

 

– “Contact Service Provider”

 

– “Tampert Alter”

 

– “Wait before enter special Code”

 

– “Contact Service’

 

 

 

It’s because you or somebody already enter too many wrong codes, you just have to let phone ON on theses errors messages and after 40 min to 2 hours maximum the message “Enter Code Special” will appear again !

 

 

 

Model : Motorola A1000 and other A models

 

 

 

1 – Click on the icon Phone

 

2 – Enter the following keys: ** 057 *

 

3 – Mobile displays “locking enter personalization”

 

4 – Enter the unlock code

 

5 – Click Ok

 

 

 

Model : Motorola L6i & L7i (not L6 and L7 without “i”)

 

 

 

1 – Press and hold “*” key by dialing code 787090

 

2 – The mobile displays: “Menu. Network”

 

3 – Choose ‘yes’ and then press OK

 

4 – The mobile ask you for code

 

5 – Enter the code for unlocking.

 

 

 

Motorola 3G

 

 

 

If your phone is on a 3G network enter **057*

 

Then enter the unlock code into the window

 

 

 

Motorola CDMA & TDMA

 

 

 

Press 74663 # [Menu] [Menu] and you will be asked for a subsidy code

 

Enter the code you receive

 

Your phone is now unlocked

 

 

 

Motorola Gleam

 

 

 

Insert a not allowed SIM card.

 

Phone will ask enter unlock code

 

 

 

If the unlock code is incorrectly entered three (3) consecutive times the phone will be blocked and stop ask to enter unlock code. In this situation you can 3 try to enter #073887* or Insert not allowed SIM card wait 10-30 min

 

or Up firmware and do Wipe data/Reset factory.

 

 

 

Motorola MPX

 

 

 

Switch ON your phone with a not allowed SIM card

 

If phone is asking for NETWORK PIN enter the NETWORK PIN we sent you

 

If phone is asking for SERVICE PROVIDER PIN. Enter the SERVICE PROVIDER PIN we sent you

 

Your phone is now unlocked

 

If phone is asking for NETWORK PUK

 

Power on the phone with the original card in and wait till phone is fully powered on and you have access to menu

 

Type * # * * 3 6 4 # and press green button

 

You will get a error message and after it your will see Engineering menu

 

Click Options

 

Click GSM Test

 

Select Send AT command

 

Now you will see a new window Saying “Send AT Command”

 

Type AT+CLCK=”PN”,0,”[SERVICE PROVIDER PIN or NETWORK PIN]” and press send

 

If you get Response “0 []” phone is unlocked

 

If you get 1 error, then make sure you have typed the code correct and try the other code

 

 

 

Switch your phone off, take battery out. Put battery back in. Power on the phone and leave it for 40 minitues to 5 hours until the message “Enter NETWORK PUK” is gone. Now enter the code received from us and 00000000 (eight zero’s) as a new password.

 

 

 

If phone is asking for SERVICE PROVIDER PUK

 

 

 

Power on the phone with the original card in and wait till phone is fully powered on and you have access to menu

 

Type * # * * 3 6 4 # and press green button

 

You will get a error message and after it your will see Engineering menu

 

Click Options

 

Click GSM Test

 

Select Send AT command

 

Now you will see a new window Saying “Send AT Command”

 

Type AT+CLCK=”PP”,0,”[SERVICE PROVIDER PIN or NETWORK PIN]” and press send

 

If you get Response “0” phone is unlocked

 

If you get 1 error, then make sure you have typed the code correct and try the other code

 

If you do not have the original card or if the original card is not accepted because you flashed the phone with other firmware, then we can not help you

 

 

 

Model: V3xxr from AT&T Boot 06.24

 

 

 

For those who are experiencing problems with this phone you use this procedure

 

 

 

1 – Get the code from our website

 

2 – Download Motorola Radiocomm v11.7.4

 

3 – Install Radiocomm and all needed drivers (we recommend 3.5 version)

 

 

 

4 – Open radiocomm and attach the phone wait until phone get connected to radiocomm or until drivers are fully installed if thats the case press “get imei” in radiocomm if imei appears in the screen the we are ready.

 

 

 

5 – Press “gsm3” tab and in the left side of the screen look for “sbsdy_lck” and select “get status” and hit execute if the phone returns 01 means that your phone is locked.

 

 

 

6 – Now select check if valid and enter the 16 digits code from server and hit execute in the upper side of the screen must be appears that subsidy code is done know turn fo your phone and power it on and thats it

How to enter my Unlock Code on NEC ?

Model : Nec N342i

 

 

 

1 – Switch ON your phone without SIM Card,

 

2 – Compose : **00012*CODE#.

 

 

 

Model : All others NEC

 

 

 

1 – Switch ON your phone without SIM Card,

 

2 – Compose : #7320*CODE#.

 

 

 

Model : old NEC

 

 

 

1 – Switch ON your phone without SIM Card,

 

2 – Compose : #3210*CODE# and press Call Button.

How to enter my Unlock Code on Nokia ?

How Can I Check if My Nokia is an SL3 Phone ?

SL3 = Sim Lock 3

An easy way to check if your Nokia phone is SL3 is key in *#0000# on the phone;

This will show the software version of the phone, if your phone version is not a double figure before the decimal point i.e. 6.51 its NOT SL3 and if version is V58.xx, V59.xx etc then its SL3.

 

 

 

Model: Nokia Lumia

 

 

1. Switch the phone off

2. Remove the SIM card

3. Insert a SIM card from another carrier into the phone (Non-Accepted SIM Card)

4. Switch the phone ON and enter the SIM Card PIN code, if requested?

5. Now wait for the (Network) SIM Unlock User Interface to Open

6. Enter the Unlock Code (20 Digits)

7. Press Enter

8. Power off the device

 

or

 

Go to the phone dialer and tap ##7820# and enter the code when prompted;

 

You are allowed ten attempts to insert the Unlock Code before your device is permanently locked (hardlocked).  If the unlock code is entered incorrectly 10 times, the phone will be blocked and the following message will be displayed:

 

This SIM card can only be used on specific networks and it is blocked. Contact your customer service centre for the unblock code: 32 attempts remaining. Enter PUK.

 

If the Unlock Code provided is saying error, please continue to enter the unlock code provided until the phone asks for the “PUK code”.  Please don’t worry about the attempts, once you have diminished all your tries, the phone will ask for the PUK code. This is where you have enter the “Unlock Code”.

 

 

Unlatching instructions for windows phone

 

Insert other network active MICROSIM ( which can receive incoming call & txt)

Start the device in normal mode

Enter the SIM CARD PIN if your inserted SIM card has SIM PIN query ON (this is not unlock code and this is purely related to simcard)

When device detects that SIM is not valid for the device the user interface will ask you to unlock code:

Enter Unlock code

When Unlock PIN is inserted Correctly, Device shows PIN ACCEPTED

Do NOT try to enter unlock code more than twice!

 

Model: All Nokia

 

 

 

1 – Switch ON your phone without SIM Card,

 

2 – Compose #PW+CODE+1#

 

 

 

(if locked from Fido/Roger Canada, please compose#PW+CODE+7#)

 

 

 

The letter P appear after press 3 times quickly the button star ( * )

 

The letter W appear after press 4 times quickly the button star ( * )

 

The letter + appear after press 2 times quickly the button star ( * )

 

 

 

3 – The phone show “SIM Restriction Off” and was unlocked !

 

 

 

Model: Nokia C3

 

 

 

Turn on the phone with a non-accepted SIM card inserted. It should state that the SIM is restricted.

 

 

 

Press OK to be able to enter the unlock code. Then, using the full QWERTY keypad as normal, type: #pw+CODE+1# and press OK

 

 

 

Note: replace CODE with the unlock code we send you

 

How to enter my Unlock Code on Palm Handspring ?

Model : Treo 180 & 270

 

 

 

1 – Switch ON your phone without SIM Card,

 

2 – Compose : *#*#CODE#

 

 

 

Model : Treo 600

 

 

 

1 – Switch ON your phone with Allowed SIM Card,

 

2 – Go to Menu and select “Phone Tool” or “Phone Application”

 

3 – Type on Virtual Keyboard *#*#CODE#

 

4 – Select with PEN “Numer” and phone will show that’s unlocked now !

 

 

 

or

 

 

 

1 – Switch ON your phone with a not Allowed SIM Card,

 

2 – Enter the Unlock Code we send to you.

 

 

 

Model : Palm Pre and Palm Pre Plus

 

 

 

1. Turn off cell phone – put in a not allowed SIM card.

 

2. Turn on cell phone – phone asks for network unlock pin (referring to the unlock code).

 

3. Enter pin number once (at this point there is no error)

 

4. Phone states SOS only calls – when you try to make a regular call it will ask for the network unlock pin again. At this point no matter how many times you put in the pin. It will state incorrect pin message.

 

5. Reboot phone with the same not allowed SIM card.

 

6. After reboot, it’s unlocked and never asked for the network unlock pin again.

How to enter my Unlock Code on Pantech ?

All models:

 

 

 

1.POWER ON PHONE WITH ACCEPETED SIM CARD

 

2.Press the following keys: *#865625#

 

3.A SIM Unlock Menu will appear, press OK

 

4.Enter Unlock Code (8 digit code)*

 

5.Re-enter Unlock Code (8 digit code)*

 

6.YOUR PHONE will display Unlock Process Complete. Press OK.

 

7.The PHONE is now unlocked

How to enter my Unlock Code on Philips ?

Model : All Philips

 

 

 

1 – Switch ON your phone with a not Accepted SIM Card,

 

2 – Phone ask for “Enter NCK”,

 

3 – You can now enter the Unlock Code we send to you.

How to enter my Unlock Code on Sagem ?

Model : Sagem My-S7

 

 

 

1 – Switch ON your phone without SIM Card,

 

2 – Compose : *#*#CODE# and press “Call” button.

 

 

 

Model : All Sagem

 

 

 

1 – Switch ON your phone with a not Allowed SIM Card,

 

2 – Phone will show “SIM VERROU”

 

3 – You can now enter the Unlock Code we send to you.

 

 

 

WARNING : if your mobile show “CODE POSTE” it’s because you have a Security Code, can be 0000 or 1234 but we can’t calculate this code with your IMEI because it’s not code from Phone but code from the User of the Phone !

How to enter my Unlock Code on Samsung ?

How to Enter Unlock Codes on all Samsung Models

 

=================================

 

 

Please put non-accepted SIM, reboot your phone and when prompted enter NCK code

=================================

 

 

MM#6 message indicates the phone has been blocked because it’s been reported stolen

 

MM#6 or MM6 error message = barred IMEI

 

=================================

 

You may have received one of the following codes;

 

NETWORK: NCK

 

Provider:

 

Sub-Provider: SP

 

De-Freeze: MCK

 

However 99% of the time NETWORK/NCK code is required.

 

Please put NON-Accepted SIM and when prompted enter NETWORK/NCK code.

 

=================================

Special Method 1: If unsuccessful, please do a factory reset, enter UN/DE-FREEZE Code first, you should see unsuccessful message,  now enter NETWORK Code, it should unlock the phone.

 

or if above didn’t work

 

Special Method 2: If unsuccessful, please do a factory reset, enter UN/DE-FREEZE Code first, you should see unsuccessful message, now enter SUB-PROVIDER Code, it should unlock.

=================================

 

 

Model: Samsung Galaxy S6

1 – Switch ON your Samsung with a non compatible SIM Card,

2 – Wait for your phone to ask for “SIM Network Unlock PIN” or “Enter Network Lock Control Key”,

3 – If you receive one, please enter your MCK (Unfreeze Key) and hit “Unlock” button.

Note: You will get “Unsuccessful message” but don’t worry that’s fine when you type MCK.

4 – Now type the NCK (Network Code) and hit the “Unlock” button.

5 – Your phone is now Unlocked !

EXTRA INSTRUCTIONS: if you get “Unsuccessful” again after type the NCK then:

7 – Hit “Dismiss” button and compose *2767*3855# on phone keypad.

8 – Wait for the phone to restart, this operation will erase all data from your phone!

9 – Retry the step 1 to 5 above !

=================================

Model: S3, Note 2, i437, i537, i547 rugby pro, S4 Active 4.2.2. (Try ALL CODE)

The method:

1. Make sure that the phone PROMPTS for the code with a NON accepted sim card and that your IMEI is correct by dialing *#06#

a. Go to the Dial pad and dial *#197328640#

b. Please click on number [1] UMTS > [1] Debugging screen > [8] Phone Control > [6] NETWORK LOCK

c. You will see 3 options

d. Please click on number [1] Perso Sha256 INFO, the screen will change slightly

e. Please hit the MENU button then when the menu pops up please carefully hit BACK to return to the previous screen

f. Next Please click on number [2] Perso Sha256 ON, the screen will change again to a one line message

g. Restart the phone on the screen by holding the power button and click RESTART

h. When the phone prompts for the unlock code simply enter the unlock code provided to you

i. Your phone is now permanently unlocked!

=================================

Model: T999L. Galaxy Ace, T599 Mobilicity, T599N Metro PCS, Canadian S2, Canadian Note 1

Simulation S2 method:

First Make sure that the phone PROMPTS for the code with a NON accepted sim card and that your IMEI is correct by dialing *#06#

a. Go to the Dial pad and dial *#197328640#

b. Please click on number Debugging screen > Phone Control > SIMULATION > NETWORK LOCK

c. You will see 3 – 4 options

d. Please click on number [1] Perso Sha256 INFO, the screen will change slightly

e. Please hit the MENU button then when the menu pops up please carefully hit BACK to return to the previous screen

f. Next Please click on number [2] Perso Sha256 ON, the screen will change again to a one line message

g. Restart the phone on the screen by holding the power button and click RESTART

h. When the phone prompts for the unlock code simply enter the unlock code provided to you

i. Your phone is now permanently unlocked!

 

=================================

 

Different phones have different Unlock Code Input Instructions, Please try the following Instructions in Order:

 

Method #1  Insert a Non accepted simcard in your phone and power on. Once finished loading your phone will ask you to enter a code, enter the Unlock Code

 

Note: Non Accepted Simcard is any simcard not from the original provider

 

OR

 

Method #2  Go to the dial screen on your phone as if you are going to make a call and press:  #7465625*638*UNLOCKCODE#  (8 digit unlock code) 

OR

 

Method #3  Go to the dial screen  on your phone as if you are going to make a call  and press:  #0111*UNLOCKCODE#  (8 digit unlock code)

 

OR

 

Method #4  Go to the dial screen  on your phone as if you are going to make a call  and press  #7465625*638*#  Once prompted for code, enter the 8 digit Unlock Code.

 

If Phone says, “Code Accepted” or “Network Unlock Successful” or “Not Yet Personalized” your phone is fully Unlocked

 

*If you are not receiving any signal after unlocking, make sure your wireless connections are turned on after unlocking the phone. Also pull the battery and restart phone.

 

How to Enter Defreeze Code for “Phone Freeze” Samsung Devices (only if your Samsung is Hard locked)

 

 

1.  Input a non-accepted simcard into the phone.

2. Proceed to the dial screen.

3. Enter the De-Freeze code (Freeze code) and press enter, or okay.

4. The screen should now ask for the unlock code (Network Code).   Enter the 8 digit unlock code and hit enter.

OR

1. Turn phone on with an unaccepted SIM CARD

2. Screen will display €œPhone is freeze / SOS

3. Type the unfreeze code (Nothing will show on screen)

4. Hit the Enter Button

5. Phone will ask for the Network lock code

6. Enter it as you have received it

7. Phone will be unfreeze and unlocked

 

 

ONLY GALAXY S2, S3, Note, Note 2

 

Follow these step carefully, as long as you have the correct code it will work 100% (Your phone must be updated to the latest firmware!)

 

1. Please make sure your phone  prompts for the code.

 

2. If nothing you  could  proceed to use the “release method” on the phone(s):

 

a. Go to the Dial pad and dial *#197328640#

 

b. Please click on number [1] UMTS > [1] Debugging screen > [8] Phone Control > [6] NETWORK LOCK

 

c. You will see 3 options

 

d. Please click on number [1] Perso Sha256 INFO, the screen will change slightly

 

e. Please hit the MENU button then when the menu pops up please carefully hit BACK to return to the previous screen

 

f. Please click on number [2] Perso Sha256 ON, the screen will change again to a one line message

 

g. Restart the phone on the screen by holding the power button and click RESTART

 

h. When the phone prompts for the unlock code simply enter the unlock code

 

i. Your phone is now permanently unlocked!

 

 

 

ONLY GALAXY S4

 

Follow these step carefully, as long as you have the correct code it will work 100% (Your phone must be updated to the latest firmware!)

1. Make sure that the phone PROMPTS for the code with a NON accepted sim card and that your IMEI is correct by dialing *#06#

 

a. Go to the Dial pad and dial *#0011#

 

b. Please click your MENU button (Bottom LEFT button) and click BACK on the menu that appears, Nothing will happen do not worry please move to the next step

 

c. Please click your MENU button AGAIN and this time click KEY INPUT

 

d. When the Key input box appears please input the number “1” and hit OK

 

e. You will see a number 1 for a while, please wait until it changes into the SERVICE MENU

 

f. Please click [1] DEBUGGING SCREEN > [6] Phone Control > [6] Network LOCK

 

g. You will see 3 OPTIONS within Network LOCK

 

h. Please click on number [1] Perso Sha256 INFO, the screen will change slightly

 

i. Please hit the MENU button then when the menu pops up please carefully hit BACK to return to the previous screen

 

j. Next Please click on number [2] Perso Sha256 ON, the screen will change again to a one line message

 

k. Restart the phone on the screen by holding the power button and click RESTART

 

l. When the phone prompts for the unlock code simply enter the unlock code provided to you

 

m. Your phone is now permanently unlocked!

 

 

 

How unfreeze Samsung GT-S5510:

 

1. Insert not supported SIM card.

 

2.  Type DEFREEZE CODE e.g. 12345678 (no numbers on screen but it is ok) press ok. 3. Phone should ask for network code, type NETWORK code e.g. 12345678 and press ok.

 

If you have trouble to enter code and/or if code is not accepted on Samsung Android Phone like Samsung T959, then please try to make “Factory Reset” following the instructions below :

 

 

 

1 – Shut your Android Galaxy S down (Power off) or remove Battery.

 

2 – Now press Volume up, Home and Power together.

 

3 – If the Samsung Symbol is comming up leave the Home Button.

 

4 – Then there is a boot Menu

 

5 – Volume Up and Down to Navigate , Home to select the choosen option.

 

 

 

 

 

Our instructions are GLOBAL instructions for all unlocking services. Instructions about unfreeze are meant for people who have purchased a FACTORY SAMSUNG GENUINE UNLOCK CODES service, which include UNFREEZE code. If you have purchased a carrier unlock code (from you network provider): this service does not include UNFREEZE code. If you have FREEZED your phone, the unlock network code won’t help to unfreeze, only unfreeze code will reset freezed phones.

 

 

 

 

Step 1: Determine the lock level of your Samsung

 

 

 

 

If you have ordered unlock codes from our website, you will have been pleased to see that every possible unlock code has been emailed to you.

 

 

 

The unlock codes emailed to you will look something like this:

 

Unfreeze: 12345678 NCK: 12345678 SCK: 12345678 SPCK: 12345678

 

 

 

Most networks only lock their Samsung handsets with the NCK lock enabled. Therefore you should only need to use this code when following the input instructions (see step 2). However some networks will have dual locks in place (whereby the NCK and another lock is enabled) or they may have just an alternative lock level such as SCK or SPCK.

 

 

 

It is best practice to be 100% sure which lock level is present on your handset, to do this follow these instructions:

 

 

 

Enter the following code into your handset while it is turned on and connected to its locked network.

 

 

 

By this we mean the connected to the network your handset is locked to (if you are locked to Orange, insert an Orange SIM card into your handset)

 

 

 

Once connected, enter this code: *#7465625#

 

 

 

A menu will be displayed that will resemble the following…

 

 

 

1. [xxx] Network lock

 

2. [xxx] Subset lock

 

3. [xxx] SP lock

 

 

 

(xxx = Value ON or OFF)

 

 

 

If only the Network lock is displayed saying ON then you will only need to use the NCK code with the instructions below. If you see the Subset lock value as ON then you will need the SCK code and if you see the SP lock value as ON you will need the SPCK code.

 

 

 

The unfreeze code we send you should only be needed if:

 

 

 

(a) You accidentally freeze your handset by entering too many incorrect codes or not following our unlock instructions accurately.

 

(b) Your handset displays the ‘phone freeze’ message whenever an alternative network SIM card is inserted into your phone prior to it being unlocked.

 

(c) You see the ‘return for service’ message.

 

 

 

Now you know the correct lock level of your handset and thus the correct code required for input, you may continue…

 

 

 

NB: If your handset does not accept the code to locate your lock level, simply move straight on to step 2 of this guide…

 

 

 

 

Step 2 : Input Instructions

 

 

 

 

Model : Samsung 3G handsets, Zxxx & Dxxx, A707, U900 Series

 

 

 

1- Switch ON your phone with a non accepted SIM Card,

 

2- Compose: #7465625*638*CODE# (or *#7465625*638*CODE#)

 

 

 

Model : Samsung Z105 & Z107

 

1 – Switch ON your phone with a not Accepted SIM Card,

 

2 – Compose : #7465625*638*CODE#

 

 

 

Model: Samsung i616 Jack or Blackjack2 from Fido Canada

 

 

 

1. Power ON your phone with a FIDO SIM Card that the phone is locked to

 

2. Type #7465625*638*

 

3. Network Lock Screen appear, enter UNLOCK CODE

 

4. Device is now unlocked

 

 

 

Model: Samsung A767 (Propel), A437, T459 (Gravity):

 

 

 

1 – Power on without SIM

 

2 – Type in #7465625*638*Unlock code# (8 digit unlock code*)

 

3 – Device should say: �Network Lock Deactivated�

 

4 – Phone may automatically reboot

 

 

 

Model: Samsung SGH-T459 (Gravity):

 

 

 

1. Power on without SIM

 

2. From the standby screen, use the dial pad to enter the number sequence

 

3. Type in #7465625*638*Unlock code# (8 digit unlock code*)

 

4. Device should say: �Network Lock Deactivated�

 

 

 

Model: Samsung i900 / Omnia

 

 

 

1 – Switch ON your phone with a NON Accepted SIM Card,

 

2 – Enter the pin code of this refused Simcard

 

3 – Device is now asking for another pin code

 

4 – Then enter the Unlock Code !

 

 

 

Model: Samsung Zxxx, Dxxx, Pxxx, T139 & F490 (ex : Z140, D520, P200, etc…)

 

 

 

1 – Switch ON your phone with a not Accepted SIM Card,

 

2 – Compose : #7465625*638*CODE#

 

 

 

Model: Samsung Z510 et Z320i et Z650i :

 

 

 

1 – Switch ON your phone with a not Accepted SIM Card,

 

3 – Compose **CODE#

 

 

 

Model : Samsung i450, i560 & i8910

 

 

 

1 – Switch ON your phone without SIM Card,

 

2 – Compose #PW+CODE+1#

 

 

 

The letter P appear after press 3 times quickly the button star ( * )

 

The letter W appear after press 4 times quickly the button star ( * )

 

The letter + appear after press 2 times quickly the button star ( * )

 

 

 

Model : Samsung i780

 

 

 

1. Insert an unaccepted SIM card

 

2. Enter the pin code to SIM card

 

3. At the top of screen an “exclamation mark” icon will appear

 

4. Click on “exclamation mark” icon

 

5. There will appear link “settings” – click on it

 

6. Virtual keyboard appears on screen with Enter PIN prompt.

 

7. Enter your 8-digit unlock code.

 

 

 

Model : Samsung i900

 

 

 

1. Insert an unaccepted SIM card

 

2. Enter the pin code to SIM card

 

3. At the top of screen a “lock” symbol with the letters NET will appear

 

4. You will also be presented with the options “OK”; “Dismiss”

 

5. Press the “OK” option

 

6. Virtual keyboard appears on screen (the “Enter PIN” prompt may or may not appear).

 

7. Enter your 8-digit unlock code.

 

8. Your phone is now unlocked

 

 

 

Model : Samsung SGH-P207:

 

 

 

1. Reset to original factory setting by typing *2767*3855#, youre phone will reboot

 

2. Then insert a sim card that is from another network that your phone is not locked to.

 

3. An Wrong sim message will come up on the screen

 

4. When message appears type in* #9998*3323#

 

5. At this time a white screen will appear which says “exit”

 

6. Tap the rigth soft key, (occasionally it will not go to the next screen, if so press the down key)

 

7. From the menu that appears scroll down to the malloc Fail option, this will reboot, and normal service screen will appear.

 

8. Then type *0141# and press the green call key, Personalized will appear on the screen, and the name of the current sim card provider will appear on the screen.

 

9. Turn phone off, and then turn on

 

10. Go to menu by tapping left soft key, then settings in bottom right hand corner, then choose option number 7 security, then choose option number 6 Sim Lock, select option 1 disable

 

11. Then enter 00000000 (eight zeros), the message will come up sim lock disabled with a check mark, your phone is now unlocked to use with other carriers.

 

 

 

Model : All others Samsung

 

 

 

1 – Switch ON your phone with a not Accepted SIM Card,

 

2 – Phone will ask for “Password”,

 

3 – You can now enter the Unlock Code we send to you.

 

 

 

OR (if phone show “Insert Correct SIM Card”)

 

 

 

1 – Switch ON your phone with a not Accepted SIM Card,

 

2 – Compose : #0111*CODE#

 

 

 

OR

 

 

 

1 – Switch ON your phone with an unaccepted SIM Card,

 

2 – The Phone will then ask for the Code or Password

 

3 – You can now enter the Unlock Code we sent to you.

 

 

 

 

Step 3: Trouble Shooting

 

 

 

 

If your handset freezes for whatever reason and displays the ‘Phone Freeze’ or ‘Return for Service’ message then you will need to use the unfreeze code that was issued with your unlock codes.

 

 

 

Below you will see a list of instructions for entering the unfreeze code into different models of Samsung handsets.

 

 

 

Choose the handset instructions closest to your own model if it is not directly available. (i.e. if you have a Samsung i900, consider using the Samsung F480 unfreeze instructions).

 

 

 

NB: Unfreeze instructions are given as an added bonus to your unlock service. This is not the service you purchased and therefore it is provided free of charge.

 

 

 

Reasons for “Phone Freeze”

 

 

 

1. Inputting the unfreeze code rather than the unlock code into your handset.

 

2. Following the incorrect input procedure for your handset (these must be followed 100% correctly).

 

3. Handset automatically displaying “Phone Freeze” when an unaccepted SIM card is inserted into the handset, however when the accepted SIM card is inserted, the handset works fine.

 

 

 

Unlocking the phone when in “Phone Freeze”

 

 

 

In order to unlock your handset when the phone is frozen, you need to have access to the handset keypad.

 

 

 

Please note the following information is not provided with any guarantee or warranty of success as the unfreeze codes we provide are issued free of charge as an added bonus with certain Samsung unlocking services.

 

 

 

Option 1 (usually used with keypad Samsungs – U900 etc)

 

 

 

While an unaccepted SIM card is inserted

 

Enter the unfreeze code

 

Hit OK (either the left soft key, or in the middle of the touch-field)

 

Your handset may or may not display an unfreeze message

 

Now enter your unlock code (see step 1 above to determine this)

 

The phone should now unlock

 

 

 

or

 

 

 

Option 2 (usually used with touch screen Samsungs – F480 etc)

 

 

 

With Original SIM card in handset

 

Enter #7465625*638*UNFREEZE CODE

 

Phone Unfrozen

 

Input unaccepted SIM card into handset

 

Enter #7465625*638*UNLOCK CODE#

 

Your Phone should now unlock

 

 

 

or

 

 

 

Option 3 (possible with any Samsung handset)

 

 

 

While an unaccepted SIM card is inserted

 

Enter unfreeze code

 

Hit OK

 

Enter unlock code

 

Your phone should now unlock

 

 

 

Please note once again, these instructions for frozen handsets are used at the owners risk.

 

 

 

Unfreeze codes are supplied as a bonus for certain Samsung services and we make no warranty or guarantee of their success.

 

 

 

If in doubt, our customers may wish to have their handset manually unfrozen by a local independent mobile phone specialist before returning to use the unlock code we provided which is 100% accurate for your handset.

 

 

 

Instruction on how to unlock Samsung SGH-A107:

 

 

 

1. Turn ON your phone without Sim Card

 

2. Enter #7465625*638*Unlock Code#

 

3. Device should say “Network Lock Deactivated”

 

4. The phone may reboot and the unlock is completed

 

Samsung Secret Code

 

*#06# (Display IMEI number)

 

*#1234# (Display current firmware)

 

*#*#4636#*#* (Diagnostic and general settings mode)

 

*#*#7780#*#* (Factory soft reset)

 

or *#7780#

 

*2767*3855# (Factory hard reset to ROM firmware default settings)

 

*2767*4387264636# (To display product code)

 

*#272*imei#* (Display/change CSC code)

 

or *#272*HHMM#*

 

*#*#1472365#*#* (GPS test settings)

 

*#*#197328640#*#* (Service mode main menu)

 

*#12580*369# (SW & HW Info)

 

*#232337# (Bluetooth Address)

 

*#232331# (Bluetooth Test Mode)

 

*#232338# (WLAN MAC Address)

 

*#0228# (ADC Reading)

 

*#32489# (Ciphering Info)

 

*#2263# (RF Band Selection)

 

*#9090# (Diagnostic ConfiguratioN)

 

*#7284# (USB I2C Mode Control)

 

*#232339# (WLAN Test Mode)

 

*#0842# (Vibra Motor Test Mode)

 

*#0782# (Real Time Clock Test)

 

*#0673# (Audio Test Mode)

 

*#0*# (General Test Mode)

 

*#872564# (USB Logging Control)

 

*#4238378# (GCF Configuration)

 

*#0283# (Audio Loopback Control)

 

*#1575# (GPS Control Menu)

 

*#3214789650# (LBS Test Mode)

 

*#745# (RIL Dump Menu)

 

*#03# (NAND Flash S/N)

 

*#0589# (Light Sensor Test Mode)

 

*#0588# (Proximity Sensor Test Mode)

 

*#273283*255*3282*# (Data Create Menu)

 

*#34971539# (Camera Firmware Update)

 

*#526# (WLAN Engineering Mode)

 

*#746# (Debug Dump Menu)

 

*#9900# (System Dump Mode)

 

*#44336# (Sofware Version Info)

 

*#273283*255*663282*# (Data Create SD Card)

 

*#3282*727336*# (Data Usage Status)

 

*#7594# (Remap Shutdown to End Call TSK)

 

*#0289# (Melody Test Mode)

 

*#2663# (TSP / TSK firmware update)

 

*#528# (WLAN Engineering Mode)

 

*#7412365# (Camera Firmware Menu)

 

or *#*#34971539#*#*

 

*#80# (Unknown)

 

*#07# (Test History)

 

*#3214789# (GCF Mode Status)

 

*#272886# (Auto Answer Selection)

 

*#8736364# (OTA Update Menu)

 

*#301279# (HSDPA/HSUPA Control Menu)

 

*#7353# (Quick Test Menu)

 

*2767*4387264636# (Sellout SMS / PCODE view)

 

*#7465625# (View Phone Lock Status)

 

*7465625*782*# (Configure Network Lock NSP)

 

*7465625*27*# (Insert Network Lock Keycode NSP/CP)

 

#7465625*27*# (Insert Content Provider Keycode)

 

#7465625*782*# (Insert Partitial Network Lock Keycode)

 

*7465625*77*# (Insert Network Lock Keycode SP)

 

#7465625*77*# (Insert Operator Lock Keycode)

 

*7465625*638*# (Configure Network Lock MCC/MNC)

 

#7465625*638*# (Insert Network Lock Keycode)

How to enter my Unlock Code on Sanyo ?

Model : All Sanyo

 

1 – Switch ON your phone with a not Allowed SIM Card,

 

2 – Enter the Unlock Code we send to you.

How to enter my Unlock Code on Sendo ?

Model : All Sendo

 

 

 

1 – Switch ON your phone with a not allowed SIM Card,

 

2 – Message “Enter NCK” will appear,

 

3 – You can now enter the Unlock Code we send to you.

How to enter my Unlock Code on Sharp ?

Model : All Sharp

 

 

 

01 – From front screen type *01763*6371#

 

02 – The handset will reset back to the main screen

 

03 – Press M button.

 

04 – Scroll to Settings and press SELECT.

 

05 – Scroll to Security and press SELECT.

 

06 – Scroll to MEP locks and press SELECT.

 

07 – Enter your Handset Code (the default code is 0000) and press OK.

 

08 – Scroll to Network and press SELECT.

 

09 – Scroll to Deactivate and press SELECT.

 

10 – Enter Unlock Code we send to you and press OK.

 

11 – Handset should then display DONE and be unlocked.

How to enter my Unlock Code on Sidekick ?

How to enter my Unlock Code on Siemens ?

Model : All Siemens

 

 

 

1 – Switch ON your phone with a not Allowed SIM Card,

 

2 – Compose : *#0000*CODE#

 

 

 

or

 

 

 

1 – Switch ON your phone with a not Allowed SIM Card,

 

2 – Compose : *#0001*CODE#

How to enter my Unlock Code on Sony ?

=================================

 

Please put new SIM and when prompted enter NETWORK/NCK code only

=================================

Please do NOT input all set of codes on your phone, it will block your counter. Only NCK Must be used, other set of codes must be used only in-case phone is locked to that particular level of lock.

 

=================================

How to enter my Unlock Code on SonyEricsson ?

=================================

 

Please put new SIM and when prompted enter NETWORK/NCK  code

=================================

Please do NOT input all set of codes on your phone, it will block your counter. Only NCK Must be used, other set of codes must be used only in-case phone is locked to that particular level of lock.

 

=================================

 

Model : All Sony Ericsson

 

 

 

 

1 – Switch ON your phone without SIM Card,

 

2 – Press 1 time the left arrow,

 

3 – Press 2 times the button * ,

 

4 – Press 1 time the left arrow,

 

5 – The message “Personalize with MNC2” will appear,

 

6 – You can now enter the Unlock Code we send to you.

 

 

 

If your phone have a “JOGDIAL” (ex : SonyEricsson K700i) you must press “down arrow” instead of “left arrow” for step 2 & 3. We mean by “Down Arrow” to direct the Jogdial down !

 

 

 

Model : Sony Ericsson Satio and Sony Ericsson Vivaz

 

 

 

1 – Switch ON your phone without a SIM Card

 

2 – Compose #PW+CODE+1#

 

(where CODE is the unlock code you are sent by email)

 

 

 

Press the star (*) button repeatedly to make the P, W or + appear

 

 

 

Model : Sony Ericsson X10

 

 

 

1. Put in a sim card from a non accepted network

 

2. Turn on the phone

 

3. It will then request for an unlock code

 

4. Press the unlock code box with your finger and then the number pad will appear at the bottom of screen

 

5. Input the unlock code

 

6. Press “UNLOCK” button which is below the unlock code box on screen

How to enter my Unlock Code on T-Mobile G1 ?

1 – Switch ON the phone with a not allowed SIM Card

 

2 – Phone will ask “SIM Network Unlock Code”

 

3 – Enter code

How to enter my Unlock Code on Toshiba ?

Model : All Toshiba

 

 

 

1 – Switch ON your phone with a not Accepted SIM Card,

 

2 – Enter the Unlock Code we send to you.

 

 

 

OR

 

 

 

1. Insert Non Vodafone SIM into the handset and power on.

 

2. The display will show Enter Network Unlock Code.

 

3. Enter **00012* then 47369761 followed by #, then press the centre menu key.

 

4. The display will now show Done.

 

5. Switch the phone off and on. The phone will now be unlocked

 

 

 

TS803 :

 

 

 

1. Insert Non Vodafone SIM into the handset and power on.

 

2. The display will show SIM Error. This SIM card cannot be used

 

3. Press the centre menu key for 3-4 seconds. The display will show Enter Code

 

4. Enter unlock code

 

5. The handset will then reboot itself. Once completed, the handset will be unlocked

 

 

 

 

Model: Portege G710

 

 

 

1 – Power on phone with sim accepted

 

2 – Put pin code

 

3 – When phone is ready, go to: START – ACCESORIES – UNLOCK SIM

 

4 – Enter UNLOCK CODE, and ACCEPT

 

How to enter my Unlock Code on Treo ?

Model : Treo 180 & 270

 

 

 

1 – Switch ON your phone without SIM Card,

 

2 – Compose : *#*#CODE#

 

 

 

Model : Treo 600

 

 

 

1 – Switch ON your phone with Allowed SIM Card,

 

2 – Go to Menu and select “Phone Tool” or “Phone Application”

 

3 – Type on Virtual Keyboard *#*#CODE#

 

4 – Select with PEN “Numer” and phone will show that’s unlocked now !

 

 

 

or

 

 

 

1 – Switch ON your phone with a not Allowed SIM Card,

 

2 – Enter the Unlock Code we send to you.

 

 

 

Model : Treo 680 / Centro:

 

 

 

1. Power on with non-cingular sim

 

It will then say “Your phone cannot be used with this SIM card”

 

 

 

2. Click ok

 

3. Click dialpad tab, bottom of the screen far left

 

4. Using stylus type *#*#code#

 

5. Press the green button

 

6. It will then say The SIM Lock has been removed from the phone”

 

 

 

Troubleshooting:

 

 

 

Error Message: “The SIM Lock has NOT been removed from this phone”

 

 

 

Solution 1: Please make sure you are entering the correct code and enter it using this method *#*#CODE# dial

 

 

 

Solution 2: If the phone says that the SIM lock has not been removed, ensure that the phone radio (wireless mode) is on.

How to enter my Unlock Code on Trium ?

Model : Trium Mars

 

 

 

1 – Swith ON your phone without SIM Card,

 

2 – Press * and without release compose : 787090 or 787292,

 

3 – The menu “Unlock Network” will appear,

 

4 – Select “YES” and enter the Unlock we send to you.

 

 

 

Model : Mitsubishi M341i

 

 

 

1 – Swith ON your phone with an Accepted SIM Card,

 

2 – Press * and without release compose : 787292,

 

3 – The menu “Unlock Network” will appear,

 

4 – Select “YES” and enter the Unlock we send to you.

 

 

 

Model : Mitsubishi M342i

 

 

 

1 – Swith ON your phone with an Accepted SIM Card,

 

2 – Press * and without release compose : 787090,

 

3 – The menu “Unlock Network” will appear,

 

4 – Select “YES” and enter the Unlock we send to you.

 

 

 

Model : All Mitsubishi

 

 

 

1 – Switch ON your phone without SIM Card,

 

2 – Press * and without release compose : 787292 or 78729,

 

3 – The menu “Unlock Network” will appear,

 

4 – Select “YES” and enter the Unlock we send to you.

How to enter my Unlock Code on UTStarcom ?

Model: GTX75 

 

 

 

1. Turn phone with an accepted Sim Card and open slide

 

2. Type *#865625#

 

3. Tap Bottom Left of the Screen to continue

 

4. Enter Unlock Code then OK

How to enter my Unlock Code on Vitel ?

Model : All Vitel

 

 

 

1 – Switch ON your phone with a not allowed SIM Card,

 

2 – Enter the Unlock Code we send to you.

 

 

 

Model: TSM7 

 

1 – Switch ON your phone without SIM Card,

 

2 – Enter the Code ##**9987,

 

3 – The phone now ask for Unlock Code.

How to enter my Unlock Code on VK Mobile ?

Model : VK530

 

 

 

1 – Switch the handset ON without SIM Card – screen will display Insert Card.

 

2 – Compose : *#83*737# (press and hold # for 1 sec) – this will give access to the personalisation menu

 

3 – Select Disable Personalisation

 

4 – Type Unlock Code we send to you and press the ok button

 

5 – Handset should now be unlocked

How to enter my Unlock Code on Wonu ?

Model : All Wonu

 

1 – Switch ON your phone with a not Allowed SIM Card,

 

2 – Enter the Unlock Code we send to you.

How to enter my Unlock Code on ZTE and Emporia

=================================

 

Please put non-accepted sim in phone and enter code provided

 

=================================

 

ZTE S302 & EMPORIA V35 etc…

 

Switch on your phone with non valid sim card

 

Enter unlock code received as follow: ###3854#UNLOCKCODE#